Canon Printer is a well-known printer brand that offers multifunctional features at a reasonable rate. While using the printer users can encounter certain error codes which are very normal with such devices. The crux of the matter is to deal with the error codes in a professional manner. The troubleshooting steps are often suggested along with the Error Codes for quick fix resolution.
Are you using PG210 and PG211 ink cartridge in your Pixma printer? Then the error codes E26 or 5400 is a common phenomenon. The codes occur mainly at the time of refilling the cartridge and even sometimes the printer is unable to recognize the cartridge. The best measure will be to clean ink cartridge connectors. Get the most effective solutions from the Canon printer tech support experts.
These are some other recommended measures to fix the errors –
Users can also try the following steps to refurbish Canon Printer error code 5400 or E26 –
List of Some of the Other Canon Printer Error Codes and Solutions
Error Code E02
Cause: The error mainly occurs when the printer is out of paper.
Solution: Load the paper in the rear tray and align the paper guide with the paper stack. Select the paper size by pressing the ‘Paper Select’ button.
Error Code E03
Cause: Paper is jammed or the cover is open.
Solution: Is the cover open? If paper remains still inside the printer then slowly pull out the paper and close the cover. Now press the ‘OK’ button to resolve the error. It is advisable not to open or close the cover during printing as it can damage the printer.
Error Code E04
Cause: The cartridge might not be installed properly.
Solution: First retract the output tray extension and the paper output tray. Now open the cover and then remove the cartridge. Make sure that the cartridge is compatible with the printer and then install the cartridge again.
Error Code E05
Cause: FINE cartridge cannot be recognized
Solution: Check whether the FINE cartridge is installed properly or not? Whether an appropriate ink cartridge is installed or not? Whether ink cartridge is compatible with the printer or not? Install the appropriate ink cartridge on the printer to fix the problem.
Error Code E08
Cause: The ink absorber is almost full
Solution: Continue printing by pressing the ‘OK’ button and contact the Canon Printer support professional for a quick repair.